View 271F_269640.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MDP 14, 16
Vishay Dale
Thick Film Resistor Networks, Dual-In-Line, Molded DIP, 01, 03, 05 Schematics
FEATURES
* 0.160" [4.06mm] maximum seated height and rugged, molded case construction. * Highly stable thick film * Low temperature coefficient (- 55C to + 125C) 100ppm/C * Reduces total assembly costs * Compatible with automatic inserting equipment * Wide resistance range * Uniform performance characteristics * Available in tube pack
STANDARD ELECTRICAL SPECIFICATIONS
MODEL/ NO. OF PINS MDP 14 SCHEMATIC RESISTOR RESISTANCE POWER RATING RANGE Max. @ 70C* W 0.125 0.250 0.125 0.125 0.250 0.125 10 - 2.2M 10 - 2.2M Consult factory 10 - 2.2M 10 - 2.2M Consult factory STANDARD TOLERANCE % 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 1, 2, 5 TEMPERATURE TCR COEFFICIENT TRACKING** (- 55C to + 125C) (- 55C to + 125C) ppm/C ppm/C 100 50 50 100 50 50 100 WEIGHT
g 1.3
01 03 05 01 03 05
MDP 16
100
1.5
* For resistor power ratings @ + 25C see derating curves. ** Tighter tracking available
ORDERING INFORMATION
01 and 03 Schematics
MDP MODEL 14 NUMBER OF PINS 01 03 SCHEMATIC 101 RESISTANCE VALUE First 2 digits (3 for "F" tolerance) are significant figures. Last digit specifies number of zeros to follow. G TOLERANCE F = 1% G= 2% J = 5%
05 Schematic
MDP MODEL 14 NUMBER OF PINS 05 SCHEMATIC 221 RESISTANCE VALUE R1 271 RESISTANCE VALUE R2 G TOLERANCE F = 1% G= 2% J = 5%
First two digits (3 for "F" tolerance) are significant figures. The last digit specifies the number of zeros to follow.
EXAMPLE: MDP14-03-101G = A dual-in-line thick film resistor network with 14 pins on 0.100" [2.54mm] centers, 03 Schematic, resistance of 100 ohm and a tolerance of 2%.
EXAMPLE: MDP14-05-221/271G = A 14 pin dual-in-line thick film resistor network with 12 series pair of resistors of 220 ohm and 270 ohm per pair and a tolerance of 2%.
www.vishay.com 40
For Technical Questions, contact: ff2aresistors@vishay.com
Document Number: 31511 Revision 06-Aug-02
MDP 14, 16
Thick Film Resistor Networks, DIP, Molded
DIMENSIONS in inches [millimeters]
A 0.010 [0.254] 0.120 0.005 [3.05 0.127] 0.310 0.010 [7.87 0.254] 0.250 0.005 [6.35 0.127] 0.010 + 0.005 - 0.002 [0.254 + 0.127 - 0.051] 0.290 Min. 0.320 Nom. 0.360 Max. [7.37 Min. 8.13 Nom. 9.14 Max.]
Vishay Dale
Pin #1 Identification Pin #1
0.030 [0.762] Typ.
0.075 0.015 [1.90 0.381] 0.100 0.010 [2.54 0.254] Non-Accumulative Tol. "C" Spaces
0.018 0.003 [0.457 0.076]
0.130 + 0.015 - 0.010 [3.30 + 0.381 - 0.254] 0.050 0.005 [1.27 0.127]
B 0.010 [0.254]
MODEL MDP 14 MDP 16
A 0.750 [19.05] 0.850 [21.59]
B 0.600 [15.24] 0.700 [17.78]
C 6 7
TECHNICAL SPECIFICATIONS
PARAMETER Package Power Rating (Maximum at + 70C) Voltage Coefficient of Resistance Dielectric Strength Insulation Resistance Operating Temperature Range Storage Temperature Range: UNIT W Veff VAC C C MDP-14 1.73 < 50ppm typical 200 > 10,000M minimum - 55 to + 125 - 55 to + 150 MDP-16 1.92
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents: Solderability: Body: Terminals: Weight: Permanency testing per MIL-STD-202, Method 215. Per MIL-STD-202, Method 208E. Molded epoxy. Copper alloy, tin-lead plated. 14 pin = 1.3 grams; 16 pin = 1.5 grams
Document Number: 31511 Revision 06-Aug-02
For Technical Questions, contact: ff2aresistors@vishay.com
www.vishay.com 41
MDP 14, 16
Vishay Dale
Power Rating (Watts)
Thick Film Resistor Networks, DIP, Molded
3.00 2.70
16 Pin Package 14 Pin Package
Single Resistor 03 0.380 01 and 05 + 25 + 70 + 125 + 150
0.190 - 50
Derating
Ambient Temperature C
CIRCUIT APPLICATIONS 01 Schematic
********
13 and 15 resistors with one pin common
The MDPXX-01 circuit provides a choice of 13 and 15 nominally equal resistors, each connected between a common pin (14 and 16) and a discrete PC board pin. Commonly used in the following applications: * MOS/ROM Pull-up/Pull-down * TTL Input Pull-down * Open Collector Pull-up * Digital Pulse Squaring * "Wired OR" Pull-up * TTL Unused Gate Pull-up * Power Driven Pull-up * High Speed Parallel Pull-up
MDP14-01 Pin #1 MDP16-01
03 Schematic
7 and 8 isolated resistors
The MDPXX-03 provides a choice of 7 and 8 nominally equal resistors, each resistor isolated from all others and wired directly across. Commonly used in the following applications: * "Wired OR" Pull-up * Long-line Impedance Balancing * Power Driven Pull-up * LED Current Limiting * Powergate Pull-up * ECL Output Pull-down * Line Termination * TTL Input Pull-down
MDP14-03 Pin #1 MDP16-03
05 Schematic
R1 R2 R1 R2 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R1 R2
TTL dual-line terminator; pulse squaring
The MDPXX-05 circuit contains 12 and 14 series pair of resistors. Each series pair is connected between ground and a common line. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring.
Pin #1
MDP14-05, MDP16-05
Standard E-24 resistance values stocked. Consult factory
www.vishay.com 42
For Technical Questions, contact: ff2aresistors@vishay.com
Document Number: 31511 Revision 06-Aug-02
MDP 14, 16
Thick Film Resistor Networks, DIP, Molded
PERFORMANCE
TEST CONDITIONS MAX. R (Typical Test Lots) 0.50% R
Vishay Dale
Power Conditioning
1.5 rated power, applied 1.5 hours "ON" and 0.5 hour "OFF" for 100 hours 4 hours at + 25C ambient temperature 5 cycles between - 65C and + 125C 2.5 x rated working voltage 5 seconds 45 minutes at full rated working voltage at - 65C 240 hours with humidity ranging from 80% RH to 98% RH Leads immersed in + 350C solder to within 1/16" of device body for 3 seconds Total of 18 shocks at 100 G's 12 hours at maximum of 20 G's between 10 and 2,000 Hz 1000 hours at + 70C, rated power applied 1.5 hours "ON, 0.5 hour "OFF" for full 1000 hour period. Derated according to the curve. 4.5 pound pull for 30 seconds 10,000 Megohm (minimum) No evidence of arcing or damage (200 VRMS for 1 minute)
Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat
0.50% R 0.25% R 0.25% R 0.50% R 0.25% R
Shock Vibration Load Life
0.25% R 0.25% R 1.00% R
Terminal Strength Insulation Resistance Dielectric Withstanding Voltage
0.25% R -- --
Document Number: 31511 Revision 06-Aug-02
For Technical Questions, contact: ff2aresistors@vishay.com
www.vishay.com 43

▲Up To Search▲

Price & Availability of 271F

	To Download 271F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .